BMYQJ - DC-4555 BLACK DEVELOPER
- MSDS: BMYQJ
- Manufacturer: MITA INDUSTRIAL CO LTD
- Product Name: DC-4555 BLACK DEVELOPER
- National Stock Number: 6850-00N029047
Product Identification
Product ID:DC-4555 BLACK DEVELOPER
MSDS Date:03/01/1990
FSC:6850
NIIN:00N029047
MSDS Number: BMYQJ
Responsible Party
HASBROUCK HEIGHTS, NJ 07604
US
Emergency Phone: 201-288-6900
Info Phone: 201-288-6900
Cage: 65678
Contractor
Telephone: 201-288-6900
Cage: 65678
Ingredients
DEVELOPER CONTAINING INGRED 2, 3, 4, AND 5.
RTECS: 9999999ZZ
Fraction By Weight: 90%
HEMATITE; (IRON OXIDE)
CAS: 1317-60-8
RTECS: MH7600000
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE), FUME
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
MAGNESIUM OXIDE
CAS: 1309-48-4
RTECS: OM3850000
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
TONER (BLACK TONER FOR DC 4555)
Fraction By Weight: 5%
COPPER OXIDE
CAS: 1317-38-0
RTECS: GL7900000
Fraction By Weight: 5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE IN NORMAL HANDLING AND USE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR
AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH THOROUGHLY WITH
WATER FOR AT LEAST 15 MIN AND SEEK MEDICAL TREATMENT. INGEST:
DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF WATER AND SEEK
MEDICAL TREATMEN T. INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O2/ ARTF RESP).
Fire Fighting
Flash Point:>350F,>177C
Extinguishing Media:IF PRODUCT BECOMES INVOLVED IN FIRE, USE CARBON
DIOXIDE EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE CARBON DIOXIDE EXTINGUISHER.
Unusual Fire/Explosion Hazard:NONE UNDER NORMAL STORAGE AND USE
CONDITIONS.
Accidental Release
Spill Release Procedures:CLEAN UP WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CLOSE CAP TIGHTLY AND STORE IN A COOL,
DRY AND DARK PLACE.
Other Precautions:AVOID COMBUSTION.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED UNDER NORMAL USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:AVOID INHALATION, INGESTION, SKIN OR EYE
CONTACT.
Supplemental Safety and Health
MELTING POINT:>237F, >1300C.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:1.8
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE BLACK POWDER, PRACTICALLY ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE IN NORMAL HANDLING AND USE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.